Specification
Engine: Engine Break-in Fuel Mixture (Oil/Gasoline Ratio)
1:25 conditions={"phase":"First tank of fuel during break-in"}
Specification
1:25 conditions={"phase":"First tank of fuel during break-in"}
Open chat with this engine and topic preloaded so you can troubleshoot faster.
Ask Boat Guru about thisProcedure · 1. Use a 1:25 oil/gasoline mixture in the first tank of fuel. WARNING: Failure to follow the engine break-in procedures can result in poor performance throughout the life of the engine and can cause engine damage. 2. ...
Diagnostic · Cause: Water or dirt in the fuel tank or fuel filter Test: Inspect and drain fuel tank; inspect fuel filter for water or dirt contamination
Spec · 1:25 oil/gasoline ratio conditions={"phase":"First tank of fuel during break-in"}
Procedure · 1. Mix oil and gasoline at a 1:25 ratio thoroughly in an approved container before pouring into the motor fuel tank. Do not pour oil and fuel separately into the fuel tank. 2. Pour the mixed fuel into the tank through...
Diagnostic · Cause: Fuel flooding Test: Push in choke knob, wait 30 seconds, then continue cranking