Specification
Ignition Coil ground return: wire_color_ignition_coil_ground
BRN conditions={"circuit":"Ignition ground"}
Specification
BRN conditions={"circuit":"Ignition ground"}
Open chat with this engine and topic preloaded so you can troubleshoot faster.
Ask Boat Guru about thisProcedure · 10. Pull the starter rope slowly until you feel the starter engage, then pull rapidly to crank the engine. Allow the rope to return slowly. Repeat until the engine starts. 11. Check for a steady stream of water flowin...
Diagnostic · Cause: Lanyard too short or not coiled, increasing likelihood of accidental activation Test: Check lanyard length (should be 122–152 cm stretched); ensure lanyard is coiled to minimize at-rest length
Spec · BRN conditions={"circuit":"Ignition primary"}
Procedure · 1. Trail the boat with the outboard tilted down (normal operating position). Do NOT rely on the tilt lock mechanism to support the outboard in the tilted up position during trailering. WARNING: The tilt lock mechanism...
Diagnostic · Cause: Recoil/rewind starter mechanism failure Test: Remove upper motor cover and recoil starter; wrap rope around starter pulley and pull quickly to verify manual start capability