Mercury 75hp 2-stroke

Specs (41)

• Upper Driveshaft Splines: Maintenance interval – upper driveshaft spline lubrication

  Every 300 hours of use or three years (dealer service) conditions={"service_level":"dealer"}

• Engine: Idle Speed in Neutral Gear (Operating Temperature)

  700 RPM conditions={"gear":"neutral","temperature":"operating temperature"}

• Engine: Horsepower

  80 conditions={"model":"80","note":"International model"}

• Gearcase: Gearcase lubricant capacity – Standard

  800 ml (27.1 fl oz) ml conditions={"models":"75, 80, 90, 100, 115","gearcase":"Standard"}

• Engine: Idle Speed in Neutral Gear (Cold Warm-Up)

  700–800 RPM conditions={"gear":"neutral","temperature":"cold warm-up"}

• Engine: Kilowatts

  73.6 kW conditions={"model":"100","note":"International model"}

• Power Trim: Maintenance interval – power trim fluid check

  Every 300 hours of use or three years conditions={"interval_type":"time or hours"}

• Gearcase: Gear ratio – Standard

  2.07:1 conditions={"models":"75, 80, 90, 100, 115","gearcase":"Standard"}

Diagnostics (0)

No published entries yet.

Procedures (3)

• Every 300 Hours / Three Years Maintenance – 75–115 HP 4-Stroke

  1. Check power trim fluid. Refer to Checking Power Trim Fluid section. 2. Lubricate all lubrication points. Lubricate more frequently when used in saltwater. Refer to ...

• Before Periods of Storage – 75–115 HP 4-Stroke

  1. Refer to the Storage section of the owner's manual for complete storage preparation procedures.

• Every Use / Pre-Operation Checks – Air Intake (75–115 HP 4-Stroke)

  1. Check that the intake silencer is in place, if equipped. 2. Check that the idle relief muffler is in place, if equipped. 3. Check for loose hose clamps and rubber b...