Neutral light flashing on Slim Binnacle ERC

Related KB links

• Digital Throttle and Shift (DTS) – Slim Binnacle ERC Dock Button: Dock Mode Throttle Capacity

  Spec · ~50% conditions={"mode":"Dock","description":"Reduces control lever throttle demand to approximately 50% of normal"}

• Disengage Throttle Only Mode

  Procedure · 1. Place both ERC levers into neutral. Throttle only will not disengage unless the ERC levers are in neutral. 2. Press the THROTTLE ONLY button. The button light will turn off. 3. Confirm the neutral lights stop flash...

• Detent tension adjustment screw: Detent tension adjustment screw direction to increase tension

  Spec · Clockwise conditions={"action":"Increase tension"}

• Engage Throttle-Only Mode (Engine RPM Warm-Up Without Shifting Into Gear)

  Procedure · 1. Place the ERC lever in neutral. 2. Press the 'Throttle-Only' button. The button light will turn on and the neutral lights will blink.

• Unintended gear engagement when captain is not at the helm

  Diagnostic · Cause: ERC not placed in throttle only mode during unmanned helm operation Test: Verify ERC is in throttle only mode; gear position should remain in neutral while RPM can still be increased