Procedure
Engage Throttle-Only Mode (Engine RPM Warm-Up Without Shifting Into Gear)
1. Place the ERC lever in neutral. 2. Press the 'Throttle-Only' button. The button light will turn on and the neutral lights will blink.
Procedure
1. Place the ERC lever in neutral. 2. Press the 'Throttle-Only' button. The button light will turn on and the neutral lights will blink.
Open chat with this engine and topic preloaded so you can troubleshoot faster.
Ask Boat Guru about thisSpec · below 2000 RPM conditions={"mode":"Shallow water operation","note":"Reduce engine speed below 2000 RPM before tilting outboard up"}
Diagnostic · Cause: ERC not placed in throttle only mode during unmanned helm operation Test: Verify ERC is in throttle only mode; gear position should remain in neutral while RPM can still be increased
Spec · 2000 RPM conditions={"mode":"Shallow water operation","note":"If engine speed exceeds 2000 RPM, outboard will automatically return down to maximum trim range"}
Procedure · 1. Place either ERC lever into gear. The warning horn will beep each time the lever is moved in and out of gear while in throttle-only mode, but the engine will remain in neutral. 2. Increase RPM of the engines as nee...
Diagnostic · Cause: Throttle only mode is engaged