Diagnostic
Performance Loss
Cause: Overheating — warning horn not working
Diagnostic
Cause: Overheating — warning horn not working
Open chat with this engine and topic preloaded so you can troubleshoot faster.
Ask Boat Guru about thisSpec · Mercury or Quicksilver High Performance Gear Lubricant
Procedure · 1. Reduce engine speed upon Engine Guardian activation (warning horn sounds for six seconds and/or engine power is reduced). 2. Move the throttle lever back to the idle position to reset the Engine Guardian system. 3....
Spec · Torque to specifications conditions={"note":"Torque bolt first, then torque locknut"}
Procedure · 1. Verify the harnesses are not routed near sharp edges, hot surfaces, or moving parts. WARNING: Do not splice or probe into any wire insulation of the DTS system. Splicing or probing will damage wire insulation allow...
Diagnostic · Cause: Overheating — warning horn not working