Procedure
1. Remove power steering cover and fill cap to check fluid level. 2. Verify the fluid level is slightly below the bottom of the fill hole. 3. If needed, add SAE 0W-30 synthetic power steering fluid (Part No. 92-858077K01). Parts: Synthetic Power Steering Fluid SAE 0W-30 (92-858077K01)
Open chat with this engine and topic preloaded so you can troubleshoot faster.
Ask Boat Guru about thisSpec · SAE 0W-30 Synthetic Power Steering Fluid conditions={"standard":"Fluid level should be slightly below the bottom of the fill hole"}
Diagnostic · Cause: High elevation (over 8,000 ft) causing over 30% power loss, or hot and humid conditions causing up to 14% power loss
Spec · Quicksilver or Mercury Precision Lubricant Power Trim and Steering Fluid; alternatively automotive ATF
Procedure · 1. Tilt the outboard to the full up position and engage the tilt support lever. 2. Remove the fill cap and check the fluid level. The fluid level should be even with the bottom of the fill hole. Add Quicksilver or Mer...
Diagnostic · Cause: Blown 5-amp fuse in DTS power harness circuit Test: Check DTS power harness circuit fuse. Refer to Maintenance section.