Procedure
Disengage Sync Mode
1. Place the ERC levers in any detent. 2. Press the SYNC button. The button light turns off.
Procedure
1. Place the ERC levers in any detent. 2. Press the SYNC button. The button light turns off.
Open chat with this engine and topic preloaded so you can troubleshoot faster.
Ask Boat Guru about thisSpec · ~50% conditions={"mode":"Dock","description":"Reduces control lever throttle demand to approximately 50% of normal"}
Diagnostic · Cause: ERC not placed in throttle only mode during unmanned helm operation Test: Verify ERC is in throttle only mode; gear position should remain in neutral while RPM can still be increased
Spec · 10 seconds conditions={"description":"Time allowed to complete the second TRANSFER button press before the request is automatically cancelled"}
Procedure · 1. Place both ERC levers in neutral. 2. Press the 1 LEVER button. The button light turns off.
Diagnostic · Cause: ERC levers moved after pressing the transfer button Test: Listen for single beep and observe transfer button light turning off as confirmation of terminated request; do not move ERC levers after pressing the tr...