Procedure
Disengage 1 Lever Mode
1. Place both ERC levers in neutral. 2. Press the 1 LEVER button. The button light turns off.
Procedure
1. Place both ERC levers in neutral. 2. Press the 1 LEVER button. The button light turns off.
Open chat with this engine and topic preloaded so you can troubleshoot faster.
Ask Boat Guru about thisSpec · ~50% conditions={"mode":"Dock","description":"Reduces control lever throttle demand to approximately 50% of normal"}
Diagnostic · Cause: ERC levers at one or both helms are not in neutral position Test: Verify ERC levers at both the active helm and intended transfer helm are in neutral
Spec · 50 % conditions={"mode":"DOCK","description":"Control lever operation reduces throttle capacity to approximately 50% of normal control lever throttle demand"}
Procedure · 1. Place both ERC levers into neutral. Throttle only will not disengage unless the ERC levers are in neutral. 2. Press the THROTTLE ONLY button. The button light will turn off. 3. Confirm the neutral lights stop flash...
Diagnostic · Cause: ERC levers at one or both helms are not in the neutral position Test: Verify ERC levers at both the active helm and the destination helm are in neutral before requesting transfer