Diagnostic
Cause: ERC levers at one or both helms are not in the neutral position Test: Verify ERC levers at both the active helm and the destination helm are in neutral before requesting transfer
Open chat with this engine and topic preloaded so you can troubleshoot faster.
Ask Boat Guru about thisSpec · 10 seconds conditions={"description":"Time allowed to complete the second TRANSFER button press before the request is automatically cancelled"}
Procedure · 1. At the helm you are requesting be made active, ensure ERC levers are in neutral, then press the TRANSFER button one time. The transfer button light turns on and one beep sounds confirming the impending transfer. WA...
Spec · 2000 RPM conditions={"mode":"Shallow water operation","note":"If engine speed exceeds 2000 RPM, outboard will automatically return down to maximum trim range"}
Procedure · 1. Ensure both the active helm station and the intended destination helm station are manned. WARNING: Never leave the active station while the engine is in gear. One-person helm transfer should only be performed while...
Diagnostic · Cause: ERC levers at one or both helms are not in neutral position Test: Verify ERC levers at both the active helm and intended transfer helm are in neutral