Diagnostic
Beep sound issued - Helm transfer does not succeed (Beep sound issued)
Cause: ERC levers at one or both helms are not in neutral position Test: Verify ERC levers at both the active helm and intended transfer helm are in neutral
Diagnostic
Cause: ERC levers at one or both helms are not in neutral position Test: Verify ERC levers at both the active helm and intended transfer helm are in neutral
Open chat with this engine and topic preloaded so you can troubleshoot faster.
Ask Boat Guru about thisSpec · 10 seconds conditions={"description":"Time allowed to complete the second TRANSFER button press before the request is automatically cancelled"}
Procedure · 1. At the helm you want to make active, with all ERC levers in neutral, press the transfer button one time. The transfer button light turns on and one beep sounds confirming the impending transfer. WARNING: If the ERC...
Spec · 75 Nm conditions={"imperial_equivalent":"55 lb-ft","note":"Transom must not yield or crack under this torque; if it does, transom must be strengthened or load carrying area increased"}
Procedure · 1. At the helm you are requesting be made active, ensure ERC levers are in neutral, then press the TRANSFER button one time. The transfer button light turns on and one beep sounds confirming the impending transfer. WA...
Diagnostic · Cause: ERC levers at one or both helms are not in the neutral position Test: Verify ERC levers at both the active helm and the destination helm are in neutral before requesting transfer