Procedure
Disengage Throttle Only Mode
1. Return the control handle to the neutral position.
Procedure
1. Return the control handle to the neutral position.
Open chat with this engine and topic preloaded so you can troubleshoot faster.
Ask Boat Guru about thisSpec · 50 % conditions={"mode":"DOCK","description":"Control lever operation reduces throttle capacity to approximately 50% of normal control lever throttle demand"}
Diagnostic · Cause: ERC not placed in throttle only mode during unmanned helm operation Test: Verify ERC is in throttle only mode; gear position should remain in neutral while RPM can still be increased
Spec · ~50% conditions={"mode":"Dock","description":"Reduces control lever throttle demand to approximately 50% of normal"}
Procedure · 1. Place both ERC levers into neutral. Throttle only will not disengage unless the ERC levers are in neutral. 2. Press the THROTTLE ONLY button. The button light will turn off. 3. Confirm the neutral lights stop flash...
Diagnostic · Cause: Engine is in Throttle-Only mode Test: Check if Throttle-Only mode has been activated via the 'Throttle-Only' button (item d) on the ERC