Procedure
1. Place the ERC lever into neutral. Throttle-only mode will not disengage unless the ERC lever is in neutral. 2. Press the 'Throttle-Only' button. The button light will turn off. 3. Confirm the neutral lights stop flashing and remain steadily illuminated.
Open chat with this engine and topic preloaded so you can troubleshoot faster.
Ask Boat Guru about thisSpec · ~50% conditions={"mode":"Dock","description":"Reduces control lever throttle demand to approximately 50% of normal"}
Diagnostic · Cause: Engine is in Throttle-Only mode Test: Check if Throttle-Only mode has been activated via the 'Throttle-Only' button (item d) on the ERC
Spec · 50 % conditions={"mode":"DOCK","description":"Control lever operation reduces throttle capacity to approximately 50% of normal control lever throttle demand"}
Procedure · 1. Place both ERC levers into neutral. Throttle only will not disengage unless the ERC levers are in neutral. 2. Press the THROTTLE ONLY button. The button light will turn off. 3. Confirm the neutral lights stop flash...
Diagnostic · Cause: ERC not placed in throttle only mode during unmanned helm operation Test: Verify ERC is in throttle only mode; gear position should remain in neutral while RPM can still be increased