Procedure
Draining Gearcase
1. Place the outboard in a vertical operating position. 2. Remove the propeller. Refer to Propeller Replacement. 3. Place the drain pan below the outboard. Tools: drain pan
Procedure
1. Place the outboard in a vertical operating position. 2. Remove the propeller. Refer to Propeller Replacement. 3. Place the drain pan below the outboard. Tools: drain pan
Open chat with this engine and topic preloaded so you can troubleshoot faster.
Ask Boat Guru about thisSpec · Tilted up, gearcase completely out of water conditions={"environment":"Saltwater or polluted water (except freezing temperatures)"}
Diagnostic · Cause: Water has settled to the bottom of the gearcase Test: Visually check drained lubricant for water presence
Spec · 500 ml (16 oz.) conditions={"situation":"Oil level below operating range"}
Procedure · 1. Place the outboard in a vertical operating position. 2. Remove the vent plug and sealing washer. 3. Remove the fill/drain plug. Place the lubricant tube into the fill hole (b) and add lubricant until it appears at ...
Diagnostic · Cause: ERC not placed in throttle only mode during unmanned helm operation Test: Verify ERC is in throttle only mode; gear position should remain in neutral while RPM can still be increased