Procedure
1. Use the Crankcase Oil Pump (91‑90265A 5) to aid in the removal of engine oil without draining the crankcase. 2. Pump out the engine oil into an appropriate container. Tools: Crankcase Oil Pump 91‑90265A 5
Open chat with this engine and topic preloaded so you can troubleshoot faster.
Ask Boat Guru about thisSpec · Mercury Verado NMMA FC-W certified SAE 25W-40 Synthetic Blend Marine 4-Stroke Engine Oil conditions={"use":"General, all-temperature use"}
Diagnostic · Cause: Lanyard too short or improperly routed, causing premature switch activation Test: Check lanyard routing; if lanyard is too short, do not shorten further — ensure at-rest coiled length is not taut while operator...
Spec · 6.3 US qt conditions={"target":"midpoint of cross hatched region"}
Procedure · 1. Tilt outboard out/up past vertical for approximately one minute to allow trapped oil to drain back to the oil sump. WARNING: Ensure the outboard is tilted out/up past vertical for at least one minute before proceed...
Diagnostic · Cause: Remote control is not shifted to the neutral position