Procedure
Filter Draining
1. Slide filter holder up to release from bracket. Hoses and wire harness can remain attached to filter holder.
Procedure
1. Slide filter holder up to release from bracket. Hoses and wire harness can remain attached to filter holder.
Open chat with this engine and topic preloaded so you can troubleshoot faster.
Ask Boat Guru about thisSpec · 3/4 to 1 turn after gasket contacts base conditions={"note":"Tighten after gasket contacts mounting base"}
Diagnostic · Cause: Water in the fuel filter has reached the full level Test: Visually inspect fuel filter holder for water accumulation
Spec · Clean oil film only — do not use grease
Procedure · 1. Position filter holder onto bracket and secure filter holder in place. 2. Lubricate the sealing ring on the filter with oil. 3. Install the filter and tighten securely by hand. 4. Visually inspect for fuel leakage ...
Diagnostic · Cause: Debris accumulation in water separating fuel filter Test: Inspect filter for blockage; replace filter if plugged