Specification
Oil Filter: Oil Filter Final Tightening
3/4 to 1 turn after gasket contacts base conditions={"note":"Tighten after gasket contacts mounting base"}
Specification
3/4 to 1 turn after gasket contacts base conditions={"note":"Tighten after gasket contacts mounting base"}
Open chat with this engine and topic preloaded so you can troubleshoot faster.
Ask Boat Guru about thisProcedure · 3. Unscrew old filter using oil filter wrench, turning the filter counterclockwise. 4. Clean the oil filter mounting base. 5. Apply a film of clean oil to filter gasket. Do not use grease. 6. Screw new filter on until...
Diagnostic · Cause: Oil contamination of belt Test: Visual inspection for oil saturation/swelling
Spec · Clean oil film only — do not use grease
Procedure · 1. Position filter holder onto bracket and secure filter holder in place. 2. Lubricate the sealing ring on the filter with oil. 3. Install the filter and tighten securely by hand. 4. Visually inspect for fuel leakage ...
Diagnostic · Cause: Water contamination in engine oil Test: Visual inspection of oil on dipstick