Procedure

Flywheel Cover Removal

1. Remove the bolts securing the flywheel cover to the rear mounting posts. Note: includes flywheel cover bolt and washer (×2), FSM vent hose, and crankcase ventilation hose. 2. Lift the flywheel cover off the front mounting post and the intake resonator. 3. Remove three screws holding the upper flywheel cover to the lower flywheel cover. 4. Separate the two flywheel cover subassemblies to access the air filter. Parts: Flywheel cover bolt and washer (×2), FSM vent hose, Crankcase ventilation hose, Upper flywheel cover, Lower flywheel cover, Air filter

Ask Boat Guru about this

Open chat with this engine and topic preloaded so you can troubleshoot faster.

Ask Boat Guru about this

Flywheel Cover Removal — Mercury Verado 250 | Boat Guru

Flywheel Cover Removal

Ask Boat Guru about this

Flywheel Cover Removal

Ask Boat Guru about this

Related KB links