Procedure
Lubricate Swivel Bracket, Tilt Support Lever, and Tilt Tube
1. Lubricate swivel bracket through fitting. Apply lubricant to tilt support lever and tilt tube as well. Parts: Extreme Grease (8M0071842), 2-4-C with PTFE (92-802859A 1)
Procedure
1. Lubricate swivel bracket through fitting. Apply lubricant to tilt support lever and tilt tube as well. Parts: Extreme Grease (8M0071842), 2-4-C with PTFE (92-802859A 1)
Open chat with this engine and topic preloaded so you can troubleshoot faster.
Ask Boat Guru about thisSpec · First 20° conditions={"operation":"On plane while boat is operating"}
Diagnostic · Cause: Outboard left tilted up in freezing or near-freezing temperatures, allowing trapped water in the gearcase to freeze Test: Inspect water pump and gearcase components for freeze damage if outboard was stored tilt...
Spec · Tilted up, gearcase completely out of water conditions={"environment":"Saltwater or polluted water (except freezing temperatures)"}
Procedure · 1. Lubricate trim rod ball ends with Extreme Grease (Part No. 8M0071842). Parts: Extreme Grease (8M0071842)
Diagnostic · Cause: Excessive trim-in (trim under) causing the bow to plow into the water; unexpected turn can occur when any turn is attempted or a significant wave is encountered Test: Check trim angle; install stainless steel t...