Procedure
1. Touch up any paint nicks on the outboard. See your dealer for touch-up paint. 2. Spray Quicksilver or Mercury Precision Lubricants Corrosion Guard (92-802878 55) on all external metal surfaces, except corrosion control anodes. Parts: Corrosion Guard (Quicksilver / Mercury Precision Lubricants) (92-802878 55)
Open chat with this engine and topic preloaded so you can troubleshoot faster.
Ask Boat Guru about thisSpec · 2 months or longer conditions={"context":"Prolonged/out-of-season storage requiring full storage preparation procedures"}
Diagnostic · Cause: Outboard left tilted up in freezing or near-freezing temperatures, allowing trapped water in the gearcase to freeze Test: Inspect water pump and gearcase components for freeze damage if outboard was stored tilt...
Spec · 30 ml (1 fl oz) conditions={"application":"Storage"}
Procedure · 1. Determine if gasoline contains alcohol (ethanol or methanol). If so, drain as much remaining gasoline as possible from the fuel tank, remote fuel line, and engine fuel system before proceeding. WARNING: Gasoline co...
Diagnostic · Cause: Boat bottom is dirty or damaged