Procedure
Procedure extracted from numbered steps
1. Lubricate the following with Quicksilver or Mercury Precision Lubricants 2. Lubricate the following with Light Weight Oil.
Procedure
1. Lubricate the following with Quicksilver or Mercury Precision Lubricants 2. Lubricate the following with Light Weight Oil.
Open chat with this engine and topic preloaded so you can troubleshoot faster.
Ask Boat Guru about thisSpec · Tighten until seats, then back off 1/4 turn
Diagnostic · Cause: Other control or navigation functions were attempted after the helm transfer procedure was started Test: Ensure no other control or navigation inputs are made until helm transfer is fully complete; cycle key sw...
Spec · Mercury or Quicksilver High Performance Gear Lubricant
Procedure · 1. Refer to Propeller Replacement for removal and installation of the propeller. Coat the entire propeller shaft with lubricant to prevent the propeller hub from corroding and seizing to the shaft. WARNING: Ensure ful...
Diagnostic · Cause: Water has settled to the bottom of the gearcase Test: Visually check drained lubricant for water presence