Diagnostic
Cause: Other control or navigation functions were attempted after the helm transfer procedure was started Test: Ensure no other control or navigation inputs are made until helm transfer is fully complete; cycle key switch off and on to clear fault codes if needed
Open chat with this engine and topic preloaded so you can troubleshoot faster.
Ask Boat Guru about thisSpec · 10 seconds conditions={"description":"Time allowed to complete the second TRANSFER button press before the request is automatically cancelled"}
Procedure · 1. Ensure ERC levers at the active helm are in the neutral position. 2. Ensure ERC levers at the helm intended for the transfer are also in the neutral position. 3. Press the TRANSFER button to initiate the helm trans...
Procedure · 1. Ensure both the active helm station and the intended destination helm station are manned. WARNING: Never leave the active station while the engine is in gear. One-person helm transfer should only be performed while...
Diagnostic · Cause: ERC levers at one or both helms are not in the neutral position Test: Verify ERC levers at both the active helm and the destination helm are in neutral before requesting transfer
Procedure · 1. At the helm you want to make active, with all ERC levers in neutral, press the transfer button one time. The transfer button light turns on and one beep sounds confirming the impending transfer. WARNING: If the ERC...