Procedure
1. Detect that port outer engine has been forced into neutral/idle condition, which also forces the inner port engine to neutral/idle. 2. Move the port control handle back into neutral. 3. Move the port control handle from neutral back into gear to restore inner engine operation.
Open chat with this engine and topic preloaded so you can troubleshoot faster.
Ask Boat Guru about thisSpec · 34.4 kPa (5.0 psi) conditions={"applicability":"Produced after January 1, 2011, for use with outboard engines"}
Diagnostic · Cause: Failure causing forced neutral/idle on port outer engine; inner port engine also forced to neutral/idle Test: Move port control handle back to neutral then into gear to restore inner engine operation
Spec · below 2000 RPM conditions={"mode":"Shallow water operation","note":"Reduce engine speed below 2000 RPM before tilting outboard up"}
Procedure · 1. Detect that starboard outer engine has been forced into neutral/idle condition, which also forces the inner starboard engine to neutral/idle. 2. Move the starboard control handle back into neutral. 3. Move the star...
Diagnostic · Cause: Failure causing forced neutral/idle on starboard outer engine; inner starboard engine also forced to neutral/idle Test: Move starboard control handle back to neutral then into gear to restore inner engine opera...