Specification
Boat / Outboard Operation: Minimum planing speed in hazardous/shallow water
24 to 40 km/h (15 to 25 mph) conditions={"condition":"Shallow water or suspected underwater obstacles"}
Specification
24 to 40 km/h (15 to 25 mph) conditions={"condition":"Shallow water or suspected underwater obstacles"}
Open chat with this engine and topic preloaded so you can troubleshoot faster.
Ask Boat Guru about thisProcedure · 1. Reduce engine speed below 2000 RPM. 2. Tilt the outboard up. Make sure all water intake holes stay submerged at all times. 3. Operate the engine at slow speed only. If engine speed exceeds 2000 RPM, the outboard wi...
Diagnostic · Cause: Impact with underwater or floating hazard Test: Stop engine immediately and inspect for broken or loose parts; check hull and transom for fractures or water leaks
Spec · below 2000 RPM conditions={"mode":"Shallow water operation","note":"Reduce engine speed below 2000 RPM before tilting outboard up"}
Procedure · 1. Stop the engine as soon as possible after striking a submerged or floating object. WARNING: Operating a damaged outboard could cause additional damage to other parts or affect control of the boat. 2. Inspect the ou...
Diagnostic · Cause: Excessive trim-in (trim under) causing the bow to plow into the water; unexpected turn can occur when any turn is attempted or a significant wave is encountered Test: Check trim angle; install stainless steel t...