Specification
Flat washer: Small flat washer diameter
0.875 in. conditions={"partNumber":"54012"}
Specification
0.875 in. conditions={"partNumber":"54012"}
Open chat with this engine and topic preloaded so you can troubleshoot faster.
Ask Boat Guru about thisProcedure · 1. Do not install wedges or plates between the transom clamp brackets and the transom (or jack plate). WARNING: Installing wedges or plates between the transom clamp brackets and the transom or jack plate is prohibite...
Diagnostic · Cause: Propeller pitch too low or diameter inappropriate for load Test: Check full throttle RPM under normal load condition
Spec · 1.50 in. conditions={"partNumber":"28421"}
Procedure · 1. Apply marine sealer to the shank of the outboard mounting bolts (not the threads). 2. Install the four 0.500 in. diameter outboard mounting bolts with 0.875 in. flat washers, 1.500 in. flat washers, and nylon inser...
Spec · 0.875 in. conditions={"quantity":"4"}