Specification
Outboard motor oil sump: Oil level operating range
Cross hatched region on dipstick conditions={"note":"Do not fill to top of operating range; any level within cross hatched region is acceptable"}
Specification
Cross hatched region on dipstick conditions={"note":"Do not fill to top of operating range; any level within cross hatched region is acceptable"}
Open chat with this engine and topic preloaded so you can troubleshoot faster.
Ask Boat Guru about thisProcedure · 1. Pull the dipstick back out and observe the oil level. Oil should be in the operating range (cross hatched region). 2. If the oil level is below the operating range (cross hatched region), remove the oil filler cap ...
Diagnostic · Cause: Engine oil level below acceptable threshold Test: Check engine oil level per Fuel and Oil – Checking and Adding Engine Oil procedure
Spec · 500 ml (16 oz.) conditions={"situation":"Oil level below operating range"}
Procedure · 1. Remove the oil fill cap and add recommended oil to the midpoint of the operating range (midpoint of cross hatched region). Adding approximately 6 liter (6.3 US qt) will bring oil level to midpoint of cross hatched ...
Diagnostic · Cause: Water contamination in engine oil Test: Visual inspection of oil on dipstick