Specification
Propeller nut: Propeller nut torque
75 Nm conditions={"alternative_unit_lb_ft":"55"}
Specification
75 Nm conditions={"alternative_unit_lb_ft":"55"}
Open chat with this engine and topic preloaded so you can troubleshoot faster.
Ask Boat Guru about thisProcedure · 1. Secure propeller nut by bending three of the tabs into the thrust hub grooves.
Diagnostic · Cause: Boat transom construction is inadequate to handle outboard mounting loads Test: Apply 75 Nm (55 lb-ft) torque to mounting locknut/bolt and inspect transom for cracking or deformation Expected: No cracking or yi...
Spec · 75 Nm conditions={"application":"Standard boat transom","imperial_lb_ft":"55"}
Procedure · 1. Pull propeller straight off shaft. If propeller is seized to the shaft and cannot be removed, have the propeller removed by an authorized dealer. WARNING: If propeller is seized to the shaft and cannot be removed, ...
Diagnostic · Cause: Boat transom is yielding under bolt torque; transom construction may not be adequate Test: Apply 75 Nm (55 lb-ft) torque to mounting locknut/bolt using a dial torque wrench and observe dial reading Expected: To...