Diagnostic
Blown fuse
Cause: Electrical overload or fault in the outboard motor circuit Test: Remove the fuse and visually inspect it for a blown condition
Diagnostic
Cause: Electrical overload or fault in the outboard motor circuit Test: Remove the fuse and visually inspect it for a blown condition
Open chat with this engine and topic preloaded so you can troubleshoot faster.
Ask Boat Guru about thisSpec · 20 Amp conditions={}
Procedure · 1. Stop the engine and disconnect the battery cable from the battery negative (–) terminal. WARNING: Before replacing a fuse, disconnect the battery cable from the battery negative (–) terminal first. Failure to prope...
Spec · 10 cm (4 in.) conditions={"context":"To avoid overheating of the engine"}
Procedure · 1. Remove the engine cover. 2. Remove the fuse box lid. 3. Remove the fuse and check it. If the fuse is blown, replace it with a fuse of the same specified rating. WARNING: Always replace a blown fuse with one of the ...
Diagnostic · Cause: Short-circuit or electrical overload in the system Test: Remove fuse and visually inspect for blown condition; replace with fuse of identical specified rating only.