Diagnostic
Blown fuse
Cause: Short-circuit or electrical overload in the system Test: Remove fuse and visually inspect for blown condition; replace with fuse of identical specified rating only.
Diagnostic
Cause: Short-circuit or electrical overload in the system Test: Remove fuse and visually inspect for blown condition; replace with fuse of identical specified rating only.
Open chat with this engine and topic preloaded so you can troubleshoot faster.
Ask Boat Guru about thisSpec · Oil level must reach the bottom line of the plug hole conditions={"motorPosition":"Tilted up and locked with tilt stopper","tankPosition":"Vertical"}
Procedure · 1. Stop the engine and disconnect the battery cable from the battery negative (-) terminal. WARNING: Before replacing a fuse, disconnect the battery cable from the battery negative (-) terminal. Failure to do so may c...
Spec · 0 °C (32°F) conditions={"context":"Mooring in cold weather; risk of water freezing in cooling system"}
Procedure · 1. Remove the engine cover. 2. Remove the fuse box lid. 3. Remove the fuse and check it. If the fuse is blown, replace it with a fuse of the same specified rating. WARNING: Always replace a blown fuse with one of the ...
Diagnostic · Cause: Electrical overload or fault in the outboard motor circuit Test: Remove the fuse and visually inspect it for a blown condition