Specification
Cooling water pump / impeller: Cold weather freeze risk temperature threshold
0 °C (32°F) conditions={"context":"Mooring in cold weather; risk of water freezing in cooling system"}
Specification
0 °C (32°F) conditions={"context":"Mooring in cold weather; risk of water freezing in cooling system"}
Open chat with this engine and topic preloaded so you can troubleshoot faster.
Ask Boat Guru about thisProcedure · 1. Pull the choke knob fully out. WARNING: Choke is not necessary when the engine is warm. Set the throttle grip to RE-START position instead. 2. Pull the starter handle slowly until you feel engagement, keep pulling ...
Diagnostic · Cause: Water residue in the water pump freezes when ambient temperature drops below 0°C (32°F) Test: Check if the outboard motor is moored in cold weather with the lower unit out of the water Expected: Lower half of o...
Spec · 0 °C (32°F) conditions={"situation":"Mooring in cold weather","risk":"Water residue in pump may freeze and damage pump and impeller"}
Procedure · 1. Pull the choke knob fully out. WARNING: Choke is not necessary when the engine is warm. Set the throttle grip to RE-START position instead. 2. Push the starter switch button and release the button as soon as the en...
Diagnostic · Cause: Insufficient cooling water flow, clogged or defective pump