Diagnostic
OTHERS - Overheating of engine / Warning lamp ON (OTHERS)
Cause: Insufficient cooling water flow, clogged or defective pump
Diagnostic
Cause: Insufficient cooling water flow, clogged or defective pump
Open chat with this engine and topic preloaded so you can troubleshoot faster.
Ask Boat Guru about thisSpec · 10 cm (4 in.) conditions={"purpose":"To avoid overheating and water pump damage during test tank engine start"}
Procedure · 1. With the shift lever in Neutral or Forward, tilt the motor up slowly by about 40° and then lower the tilt lever to set at the shallow water running position. WARNING: Do not place your hand between the swivel brack...
Spec · 10 cm (4 in.) conditions={"context":"Engine started in test tank"}
Procedure · 1. After starting the outboard motor, confirm that water is being discharged from the cooling water check port. Repair if no discharge is observed. WARNING: Running the engine without cooling water flow can cause seve...
Diagnostic · Cause: Unbalanced load on boat