Engine failing to start

Related KB links

• Engine: Ignition System

  Spec · Flywheel Magneto C.D. ignition

• Cold Engine Start

  Procedure · 1. Raise the Free accel lever a little. 2. Turn the main switch key to the start position. 3. Stop pushing the key when the engine has started. 4. Return the choke plate to the open position.

• Starter Motor: Wait time between crank attempts

  Spec · 10 seconds conditions={"context":"If cranking over 5 seconds fails to start engine, wait at least 10 seconds before cranking again"}

• Manual choke procedure when choke solenoid fails to operate (EP and EPT type only)

  Procedure · 1. Remove the top cowl. 2. Close the choke plate by finger. 3. Raise the free throttle lever a little. 4. Turn the main switch key to start position. 5. Stop pushing the key when the engine has started. 6. Return the ...

• Engine starting but stopping soon

  Diagnostic · Cause: Ignition key switch failure