Diagnostic
Cause: Primer bulb/hose assembly does not contain a Fuel Demand Valve (FDV) or a sealing mechanism in the fuel connector. Test: Verify primer bulb/hose assembly has FDV in fuel hose or sealing mechanism in fuel connector before connecting to engine.
Open chat with this engine and topic preloaded so you can troubleshoot faster.
Ask Boat Guru about thisSpec · 34.4 kPa (5.0 psi) conditions={"regulation":"EPA","applicability":"Portable fuel systems produced after January 1, 2011 for use with outboard engines","market":"United States and Canada"}
Procedure · 1. When using an EPA approval fuel tank, only use a primer bulb/hose assembly that has a Fuel Demand Valve (FDV) installed in the fuel hose or a sealing mechanism in the fuel connector. WARNING: Do NOT use a primer bu...
Spec · Inside engine cover
Procedure · 1. Connect the fuel connector to the engine and fuel tank. Push and insert the connector on the engine side. 2. Pull and insert the connector on the fuel tank side. 3. Squeeze primer bulb until it becomes stiff to fee...
Diagnostic · Cause: Contaminated fuel supply or degraded filter Test: Visual inspection of fuel filter inside engine cover