Diagnostic
Cause: Over-rotation of propeller caused by water spray when motor is not properly secured in forward gear and tilted up Test: Verify stop switch lock is removed, motor is in forward gear, and motor is tilted up when not in use
Open chat with this engine and topic preloaded so you can troubleshoot faster.
Ask Boat Guru about thisSpec · 0 °C (32°F) conditions={"situation":"Mooring in cold weather","risk":"Water residue in pump may freeze and damage pump and impeller"}
Procedure · 1. Remove the stop switch lock. WARNING: When the auxiliary outboard motor is not in operation, failure to follow this procedure may cause over-rotation of the propeller due to water spray and water ingestion, which c...
Spec · 5 seconds conditions={"warning":"Exceeding 5 seconds may deplete battery and/or damage starter"}
Procedure · 1. Remove the stop switch lock. WARNING: Over-rotation of the propeller due to water spray could damage the gear if this procedure is not followed. 2. Shift into forward gear. 3. Tilt the outboard motor up.
Diagnostic · Cause: Physical damage or wear to propeller blades Test: Visual inspection of propeller edge and blade geometry