Overheating of engine

Related KB links

• Test tank: Minimum water level above anti-ventilation plate (test tank)

  Spec · 10 cm (4 in.) conditions={"purpose":"Prevent engine overheating during test tank operation"}

• Daily Inspection – Cooling Water

  Procedure · 1. After starting the outboard motor, confirm that water is being discharged from the cooling water check port. Repair if no discharge is observed. WARNING: Running the engine without cooling water flow can cause seve...

• Test Tank Setup: Minimum water level above anti-ventilation plate for test tank operation

  Spec · 10 cm (4 in.) conditions={"context":"To avoid overheating of the engine"}

• Starting the Engine in a Test Tank

  Procedure · 1. Ensure water level is at least 10 cm (4 in.) above the anti-ventilation plate to avoid overheating of the engine. 2. Run at idling only. 3. Remove the propeller. (See page 72)

• Engine failing to start

  Diagnostic · Cause: Poor carburetor adjustment