Procedure
Daily Inspection – Fuel Tank Cap
1. Check for crack, leakage, or damage in the fuel tank cap. Replace if found. 2. Check for crack or damage in the gasket. Replace if found. 3. Check for leakage at full close. Replace cap if leaking.
Procedure
1. Check for crack, leakage, or damage in the fuel tank cap. Replace if found. 2. Check for crack or damage in the gasket. Replace if found. 3. Check for leakage at full close. Replace cap if leaking.
Open chat with this engine and topic preloaded so you can troubleshoot faster.
Ask Boat Guru about thisSpec · 12 L (3.17 US gal)
Diagnostic · Cause: Internal pressure of fuel tank raised by heat from sources such as sunlight; cap loosened using incorrect procedure. Test: Inspect fuel tank cap opening procedure; ensure correct procedure is followed.
Spec · 12 L (US gal: 3.17) conditions={"type":"Separate"}
Procedure · 1. Check the amount of fuel in the tank. Replenish if low. 2. Check for debris or water in the fuel filters. Clean or replace as needed. 3. Check the rubber hoses for fuel leakage. Replace if leaking.
Diagnostic · Cause: Fuel tank overfilled; air vent screw loose or open under high temperature conditions Test: Check fill level does not exceed tank capacity; ensure air vent screw is closed during transport/storage