Procedure
Daily Inspection – Fuel System
1. Check the amount of fuel in the tank. Replenish if low. 2. Check for debris or water in the fuel filters. Clean or replace as needed. 3. Check the rubber hoses for fuel leakage. Replace if leaking.
Procedure
1. Check the amount of fuel in the tank. Replenish if low. 2. Check for debris or water in the fuel filters. Clean or replace as needed. 3. Check the rubber hoses for fuel leakage. Replace if leaking.
Open chat with this engine and topic preloaded so you can troubleshoot faster.
Ask Boat Guru about thisSpec · 10 minutes conditions={"situation":"After adding fuel stabilizer additive, run motor in water to replace old fuel"}
Diagnostic · Cause: Degraded rubber components (hardness/alteration), corroded metals, or improper reassembly after cleaning; may be worsened after long-term storage Test: Periodically inspect all fuel system parts for leaks, rubb...
Spec · Oil level must reach the bottom line of the plug hole conditions={"motorPosition":"Tilted up and locked with tilt stopper","tankPosition":"Vertical"}
Procedure · 1. Check for crack, leakage, or damage in the fuel tank cap. Replace if found. 2. Check for crack or damage in the gasket. Replace if found. 3. Check for leakage at full close. Replace cap if leaking.
Diagnostic · Cause: Degradation of rubber components (hardness change), corrosion of metal parts, or improper assembly after disassembly; may worsen after long-term storage Test: Visually inspect all fuel system parts periodically...