Diagnostic
Cause: Degraded rubber components (hardness/alteration), corroded metals, or improper reassembly after cleaning; may be worsened after long-term storage Test: Periodically inspect all fuel system parts for leaks, rubber hardness/alteration, metal expansion, and corrosion
Open chat with this engine and topic preloaded so you can troubleshoot faster.
Ask Boat Guru about thisSpec · 34.4 kPa (5.0 psi) conditions={"regulation":"EPA","applicability":"Portable fuel systems produced after January 1, 2011 for use with outboard engines","market":"United States and Canada"}
Procedure · 1. Check the amount of fuel in the tank. Replenish if low. 2. Check for debris or water in the fuel filters. Clean or replace as needed. 3. Check the rubber hoses for fuel leakage. Replace if leaking.
Spec · 10 minutes conditions={"situation":"After adding fuel stabilizer additive, run motor in water to replace old fuel"}
Procedure · 1. Check for crack, leakage, or damage in the fuel tank cap. Replace if found. 2. Check for crack or damage in the gasket. Replace if found. 3. Check for leakage at full close. Replace cap if leaking.
Diagnostic · Cause: Degradation of rubber components (hardness change), corrosion of metal parts, or improper assembly after disassembly; may worsen after long-term storage Test: Visually inspect all fuel system parts periodically...