Procedure
Emergency Stop Switch Lock – Operator Overboard
1. If the operator falls into the water, use the spare emergency stop switch lock to stop the engine.
Procedure
1. If the operator falls into the water, use the spare emergency stop switch lock to stop the engine.
Open chat with this engine and topic preloaded so you can troubleshoot faster.
Ask Boat Guru about thisSpec · Tool bag
Diagnostic · Cause: Stop switch or main switch key malfunction Test: Remove the stop switch lock as an emergency stopping method
Spec · Stop switch (1), Stop switch lock (2)
Procedure · 1. Before operating, confirm the spare stop switch lock is present in the tool bag. 2. If the operator falls into the water, use the spare emergency stop switch lock to restart/re-engage the engine stop switch system.
Diagnostic · Cause: Over-rotation of propeller caused by water spray when motor is not properly secured in forward gear and tilted up Test: Verify stop switch lock is removed, motor is in forward gear, and motor is tilted up when ...