Procedure
1. Put the control lever in the Neutral position and run the engine for 2–3 minutes at idling speed for cooling down if it has been running at full speed. 2. Turn the main switch key to the OFF position or push the stop switch. WARNING: Do not forget to turn the key off.
Open chat with this engine and topic preloaded so you can troubleshoot faster.
Ask Boat Guru about thisSpec · 2–3 minutes conditions={"prior_operation":"Full speed running"}
Diagnostic · Cause: Stop switch or main switch key malfunction Test: Remove the stop switch lock as an emergency stopping method
Spec · Direct trim tab toward A (left from rear of boat) conditions={"location":"Under anti-ventilation plate"}
Procedure · 1. Put the control lever in the Neutral position and run the engine for 2–3 minutes at idling speed for cooling down if it has been running at full speed. 2. Turn the main switch key to the OFF position or push the st...
Diagnostic · Cause: Damaged or bent propeller