Engine: Engine idle cool-down duration before stopping

Related KB links

• Fuel Filter Inspection and Replacement (Engine)

  Procedure · 1. Ensure the engine is not operating or hot before beginning. Allow sufficient cool-down time after stopping. WARNING: Gasoline and its vapors are very flammable and can be explosive. Do not start this procedure whil...

• ENOW00862-1 - Gear or clutch damage

  Diagnostic · Cause: Shifting performed at high engine speed instead of slow idle Test: Verify engine is at slow idle before shifting

• Engine: Idle cool-down duration before stop

  Spec · 2–3 minutes conditions={"prior_operation":"Full speed"}

• Shifting into Forward or Reverse

  Procedure · 1. Ensure the boat is properly moored. WARNING: Make sure no swimmers are around the boat. 2. Verify that the outboard motor can be steered fully to the right and left. 3. Attach the emergency stop switch lanyard to t...

• Engine failing to start / Engine starting but stopping soon / Poor idling / Poor acceleration / Engine speed abnormally high / Engine speed abnormally low / Boat speed low / Overheating of engine

  Diagnostic · Cause: Oil deterioration