Procedure
Engine Stopping – Tiller/Standard Type
1. Turn the main switch key to the OFF position or push the stop switch. WARNING: Do not forget to turn the key off.
Procedure
1. Turn the main switch key to the OFF position or push the stop switch. WARNING: Do not forget to turn the key off.
Open chat with this engine and topic preloaded so you can troubleshoot faster.
Ask Boat Guru about thisSpec · 10 seconds conditions={"context":"After returning main switch to ON following a failed crank attempt"}
Diagnostic · Cause: Stop switch or main switch key malfunction Test: Remove the stop switch lock as an emergency stopping method
Spec · 10 seconds conditions={"mainSwitch":"Return to ON before re-cranking"}
Procedure · 1. Put the control lever in the Neutral position and run the engine for 2–3 minutes at idling speed for cooling down if it has been running at full speed. 2. Turn the main switch key to the OFF position or push the st...
Diagnostic · Cause: Ignition key switch failure