Procedure
1. Remove the battery cables. WARNING: Before servicing the motor for storage, remove the battery cables. 2. Remove the spark plug caps from the spark plugs. WARNING: Do not run the motor out of the water. 3. Be sure to use cloth to remove fuel remaining in the cowl and dispose of it in accordance with local fire prevention and environment protection regulations. 4. Be sure to use fuel stabilizer while running the motor before storage (See page 79).
Open chat with this engine and topic preloaded so you can troubleshoot faster.
Ask Boat Guru about thisSpec · 12V 70AH/5HR, 650CCA conditions={"climate":"cold weather"}
Diagnostic · Cause: Dead battery or failed power tilt switch. Test: Attempt to operate the power tilt switch; if no response, check battery charge and switch continuity.
Spec · 5 seconds conditions={"warning":"Exceeding 5 seconds may drain battery and prevent starting or damage starter"}
Procedure · 1. Wash the engine exterior and flush the cooling water system thoroughly with fresh water. Drain the water completely. Wipe off any surface water with an oily rag. WARNING: Do not run the motor out of the water. Remo...
Diagnostic · Cause: Short-circuit or electrical overload in the system Test: Remove fuse and visually inspect for blown condition; replace with fuse of identical specified rating only.