Procedure
1. If it is difficult to shift back to neutral after shifting during warm-up, stop the engine. 2. Manually shift to neutral position. 3. Restart the engine and allow it to warm up in neutral.
Open chat with this engine and topic preloaded so you can troubleshoot faster.
Ask Boat Guru about thisSpec · 10 cm (4 in.) conditions={"purpose":"To avoid overheating and water pump damage during test tank engine start"}
Diagnostic · Cause: Idle speed is elevated during engine warm-up Test: Attempt to shift to neutral; if unsuccessful, stop engine, shift to neutral manually, then restart to continue warm-up
Spec · 900 rpm conditions={"state":"warmed up","gear":"in gear"}
Procedure · 1. Attach the emergency stop switch lanyard to the operator's PFD or arm before cruising and keep it attached at all times. WARNING: Do not attach the tether to clothing that can be torn easily. Arrange tether so it w...
Diagnostic · Cause: Touching engine surfaces during or immediately after operation Test: Visual/tactile check — HOT SURFACE label (5-2)