Procedure
1. Ensure sufficient ground clearance is provided when the outboard motor is tilted up. 2. Use a transom saver bar to support the outboard motor during transport or when tilted up. Tools: Transom saver bar
Open chat with this engine and topic preloaded so you can troubleshoot faster.
Ask Boat Guru about thisSpec · 5–25 mm (0.2–1 in) conditions={"note":"Minimum distance between bottom cowl and water surface to prevent water ingress"}
Diagnostic · Cause: Tilt support device is not designed for towing; it is intended only to support the outboard motor while the boat is docked or beached. Test: Inspect whether the tilt support device is being used during road tra...
Spec · 1 in conditions={"reference":"Bottom of hull"}
Procedure · 1. Ensure sufficient ground clearance is provided when the outboard motor is tilted up. 2. Use a transom saver bar to support the outboard motor during transport. WARNING: Do not go under the outboard motor when it is...
Diagnostic · Cause: Risk of outboard motor falling while tilted, even when supported by a support bar. Test: Visual inspection — confirm motor is fully secured before any personnel work near or under it.