Procedure
1. Reduce throttle to less than half-open and move to a safe place quickly. WARNING: Engine will run rough until throttle is reduced. 2. Stop the engine. 3. Inspect the propeller for bent or damaged blades. 4. If the same fault persists after replacing the propeller with a new one, consult an authorized dealer.
Open chat with this engine and topic preloaded so you can troubleshoot faster.
Ask Boat Guru about thisSpec · 2800 rpm conditions={"trigger":"Low speed ESG ON"}
Diagnostic · Cause: Bent or damaged propeller blades Test: Check propeller for bent or damaged blades; replace propeller and retest
Spec · 6300 rpm conditions={"trigger":"High speed ESG ON"}
Procedure · 1. Move to a safe place quickly. WARNING: Do not continue to run the engine even though speed is limited to 2800 min⁻¹ (rpm). 2. Stop the engine and allow it to cool down. 3. Check engine oil level and add engine oil ...
Diagnostic · Cause: Low or abnormal engine oil level Test: Check engine oil level; add oil if necessary and consult dealer if level remains abnormal