Procedure
1. Move to a safe place quickly. 2. Check whether cooling water is discharged from the water check port at idle speed. 3. Stop the engine. 4. Remove any foreign matter from the gear case and propeller if necessary. 5. If there is still no discharge of cooling water, consult an authorized dealer.
Open chat with this engine and topic preloaded so you can troubleshoot faster.
Ask Boat Guru about thisSpec · 2800 rpm conditions={"trigger":"Cooling water fault, oil pressure fault, or sensor fault"}
Diagnostic · Cause: Foreign matter blocking gear case or propeller, or cooling water circuit failure Test: Verify cooling water discharge from water check port at idle speed; remove foreign matter from gear case and propeller
Spec · 10 cm (4 in.) conditions={"context":"Engine started in test tank"}
Procedure · 1. Reduce throttle to less than half-open and move to a safe place quickly. WARNING: Engine will run rough until throttle is reduced. 2. Stop the engine. 3. Inspect the propeller for bent or damaged blades. 4. If the ...
Diagnostic · Cause: Object or debris blocking the cooling water check port Test: Inspect cooling water check port for blockage; remove any debris found