Specification
Engine: Cooling System
Water cooling
Specification
Water cooling
Open chat with this engine and topic preloaded so you can troubleshoot faster.
Ask Boat Guru about thisProcedure · 1. Place the shift lever in the neutral position and start the engine and run at idle speed for 3–5 minutes. 2. Check if a steady stream of water flows from the cooling water check port. 3. Stop the engine and turn of...
Diagnostic · Cause: Insufficient cooling water flow, clogged or defective pump
Spec · Water cooling
Procedure · 1. Disconnect the fuel connector. Wash the engine exterior and flush the cooling water system thoroughly with fresh water. Drain the water completely. Wipe off any surface water with an oily rag. WARNING: Be sure to d...
Diagnostic · Cause: Outboard motor tilted up while engine is operating, preventing cooling water discharge