Engine: Idle Speed in Forward Gear

Related KB links

• Pre-Shift Safety Checks – Tiller Handle Type

  Procedure · 1. Attach the emergency stop switch lanyard to the operator's PFD or arm before cruising and keep it attached at all times. WARNING: Do not attach the tether to clothing that can be torn easily. Arrange tether so it w...

• Engine speed exceeds maximum allowable RPM

  Diagnostic · Cause: Engine load became too light, causing over-revolution Test: Buzzer sounds; High Speed ESG activated — spark plug ignition suppressed; engine speed controlled under 6300 rpm

• Engine: Idle Speed in Neutral Gear

  Spec · 950 rpm

• Shifting into Forward or Reverse

  Procedure · 1. Ensure the boat is properly moored. WARNING: Make sure no swimmers are around the boat. 2. Verify that the outboard motor can be steered fully to the right and left. 3. Attach the emergency stop switch lanyard to t...

• ENOW00862-1 - Gear or clutch damage

  Diagnostic · Cause: Shifting performed at high engine speed instead of slow idle Test: Verify engine is at slow idle before shifting