Specification
Engine: Idling speed after warm-up (Clutch in / In gear)
900 min⁻¹ (rpm) conditions={"clutch":"In gear"}
Specification
900 min⁻¹ (rpm) conditions={"clutch":"In gear"}
Open chat with this engine and topic preloaded so you can troubleshoot faster.
Ask Boat Guru about thisProcedure · 1. Put the control lever in the Neutral position and run the engine for 2–3 minutes at idling speed for cooling down if it has been running at full speed. 2. Turn the main switch key to the OFF position or push the st...
Diagnostic · Cause: Idle speed is elevated during engine warm-up Test: Attempt to shift to neutral; if unsuccessful, stop engine, shift to neutral manually, then restart to continue warm-up
Spec · 900 rpm conditions={"state":"warmed up","gear":"in gear"}
Procedure · 1. Remove the propeller before starting the engine in the test tank. 2. Ensure the water level in the test tank is over 10 cm (4 in.) above the intake. WARNING: Run the engine only at idling speed when using a test ta...
Diagnostic · Cause: Improper thrust rod position